Alla Lighting T25 3057 3157 CANBUS LED Decoders for Anti-Flicker Fix LED Turn Signal Lights Bulbs Hyper Flash Resistor Adapter Harness Kits/Error Free Codes

Alla Lighting T25 3057 3157 CANBUS LED Decoders for Anti-Flicker Fix LED Turn Signal Lights Bulbs Hyper Flash Resistor Adapter Harness Kits/ Error Free Codes This listing features one pair ( 2 pieces) T25 3057 3157 CANBUS Decoder for anti flicker LED turn signal lights bulbs/DRL lights error code on the dash board or flickering on-off due to led bulbs draw much less current than stock lamp, directly plug and play, easy installation. Features:--- Can solve flickering, error code, non-function etc. problems of most European vehicles.--- Directly plug and play, easy installation,--- Cancel Error Message cause by OBC (On-Board Computer) Check. Cancel Hyper Blink on LED turn signal lights Difference Between Advanced Resistors vs Traditional 1. High quality, engineered to last and be the safest way to add load equalizer to automotive lighting system: 3x more Surface Area for heat dissipation than traditional golden resistor. 2. The most thermally safe resistors on the market: Max. operating temperature about 200° F when properly mounted to metal surface, up to 100° F less than traditional golden resistor. 3. Super long reach: 36" cable measuring from bulb to resistor allowing resistor being mounted to a perfect metal flat spot (29.5" cable from resistor, 5.5" from male and female harness). 4. Lower profile, about 1/3 flatter than traditional golden resistor, greatly reduces the chance of touching any plastic parts. 5. Weather tight and sealed connectors between resistor and harness, weatherproof. 6. Friendly design, plug and play choices to either connector resistors to both high and low intensity for 3157 and 7443, or only to connector resistor to high intensity and to leave low intensity connector empty wrapped with electrical tape, is the case for most vehicles. 7. Current Draw: 2A @ 12V | 2.4A @ 14.4V. 8. Downside compared to golden resistor requires more space to mount: 3.44"x1.53" vs 1.97"x 0.89”. But 36 inches of wiring makes finding an installation location easy.

• (Set of 2 T25 3057 3157 CANBUS decoders) CAN Bus Error Free for T25 wedge LED bulbs hyper flash/fast blinking PLZ check the female plug matches your stock harness before purchasing. Easy Installation: All-in-One Design. Plug and Play Setup for. Average Installation time: 15-20 minutes
• Solves the problem of LED bulbs flashing/flickering or error code canceler when installed.
• Extension cable length: 29.5inch. Clears OBC and CAN-BUS warning errors on the dashboard when LED bulbs are installed. Used for: halogen/ incandescent front rear turn signal blinker light, back-up reverse light, brake stop tail light lamps upgrading led bulbs.
• Cross reference: 3047, 3047LL, 3047K, 3057A, 3057ALL, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 3057LL, 3155, 3155LL, 3157A, 3157AK, 3157 ,3157K, 3157X, 3157LL, 3157ST, 3157KX, 3157NA, 3157NALL, 3157NAK, 3357A, 3357ALL, 3357, 3357LL, 3357K, 3454NA, 3457A, 3457ALL, 3457AK, 3457, 3457K, 3457NA, 3457NAK, 3757A, 3757AK, 3757ALL, 4057, 4057LL, 4057K, 4114, 4114LL, 4114K, 4157, 4157LL, 4157K, 4157NA, 4157NAK, 5702A, 5702AK, 5702AK,etc.
• We offer ONE year warranty and lifetime support